Newton Total Concrete understands that every fantastic structure begins with a rock-solid base. We ensure that our foundation expertise is the base of every one of your projects (be it a new house, addition to an existing building, or shed) that your project is built upon a solid base of solid, properly designed and engineered ground to be the base of your investment for generations.

A concrete foundation is the structural support for a building and its transfer of loads to the earth. Concrete foundations provide a level area in which to build, prevent settlement, and protect from water intrusion. The properly engineered and installed concrete foundation is the most important part of any structure.
As a result of Newton’s various soil conditions and climate, foundations need to be able to withstand freeze-thaw cycles, groundwater management, and soil bearing capacity. We design and construct each foundation to meet these issues while meeting all of the current Massachusetts Building Codes.
Concrete Foundations for Sheds: Small Structures Deserve Good Foundations. Our Concrete Foundations are sized correctly according to the structure being built, as well as the amount of weight that will be placed on the structure (i.e., contents).
Concrete Foundations for Homes: Are you planning a brand new house or a large addition? We will work with your contractor or architect to make sure the concrete foundation is constructed as per your construction drawings and construction schedule.
Concrete Foundations for Buildings: Any commercial or large residential building project requires specialized foundation engineering and design. Whether it is a multi-family building, office building, or other type of commercial building, we have experience with foundations of all sizes.
Concrete Foundations for Contractors/Builders: As contractors/builders in Newton, we know construction schedules and can fit into your project’s timeline to keep your project moving.

1. Site Analysis:
We assess your property’s drainage, grade, access, and soil condition to determine how we will build your house and to identify any challenges that may arise during the process.
2. Excavation:
We dig deep enough to reach the required depth (usually below Newton’s frost line) to remove as much of the poor-quality soil as possible and create the necessary size for your foundation.
3. Footings Installation:
The concrete footings spread the load from the entire structure across a larger surface area. We pour footings according to engineered specifications and add all necessary reinforcing steel.
4. Foundation Walls:
If you are having us build a basement or crawlspace-type foundation, we will create and pour the walls to the correct thickness and include the proper amount of reinforcing steel.
5. Curing and Backfilling:
After all the footings and walls have been completed, we let them cure for a sufficient period before filling in the dirt behind the walls to ensure they can support their intended use.

Footings are the widened base of your foundation that spreads the building load over a larger soil area. We install various footing types:
Spread Footings: Wide pads of concrete under each column or post to distribute the heavy loads at those points.
Continuous Footings: Under load-bearing walls, provide continued support along the length of the wall.
Combined Footings: Support either several columns or walls, in situations where there is little room or when the loads need to be supported by both structures.
Raft Foundations: A thick concrete slab that supports all of the areas of your house (footprint), used when the soil cannot support the weight of the building.
We build all of our footings to the correct depth, sufficient width to handle the weight loads they will have to carry, and include reinforcement as required per the engineer’s plan.
Local Knowledge and Experience: As a local business that has been laying foundations in Newton for many years, we have experience working with various types of soils and an understanding of the local water table and building department regulations.
Structural Engineering: For complex projects or projects that require additional structural support, we provide structural engineering support to design each of our foundations to ensure they are structurally adequate for their intended purpose.
Materials: The materials we use to lay our foundations include specially formulated high-strength concrete mixes designed for foundation applications.
Workforce Experience & Quality: Due to the nature of foundation work requiring precision, all aspects of our foundation work, including excavation, forming, reinforcing, and pouring, are completed by experienced professionals.
Compliance With Codes & Regulations: All of our foundations meet the Massachusetts Building Code compliance and pass inspections on the first try.
Service: We offer a complete service from the initial excavation to the final backfill of your foundation installation.
Coordination & Communication: To help you stay on track and meet your deadline, we coordinate with you and other parties involved (builders, architects, and/or inspectors) to assist in keeping your project moving forward.

Regardless of whether you are planning to build a new home, add to your present house, or construct an accessory building, your construction needs a foundation built with longevity as its main goal.
Please contact Newton Total Concrete for a complimentary consultation. We will analyze your project’s needs, assess the site conditions at your property, and provide a detailed price quotation for a foundation that will be able to provide stability to your structure for many years to come.
You may call us today or fill out our form requesting your complimentary estimate online.
We are your local experts in concrete foundations serving all neighborhoods of Newton, MA, and the surrounding area.